25W smaller led driver from China manufacturer - EUROLITE INTERNATIONAL.CO.LTD.

Payment Terms:	T/T,L/C,WU
Place of Origin:	, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean

Packing: nertual package

certificate: CE,ROHS,Others

Production Capacity: 10000 Piece/Pieces per Mont...

Delivery Date: 7-10 working days after got...

led driver
60W Single Output Switching Power Supply
UL1310 Class 2 power unit
Low cost, high reliability
2 years warranty

High efficiency led driver Description

---high efficiency led driver

DCVOLTAGE	5V
LED OPERATION VOLTAGE	3~5V
RATEDCURRENT	5A
CURRENTRANGE	0~5A
RATEDPOWER	25W
RIPPLE&NOISENOTE.2	80MVP-P
VOLTAGE ADJ RANGE	4.5~5.5V
VOLTAGE ADJ RANGE	Can be adjusted by intemal potential meter SVR2
VOLTAGETOLERANCENOTE.3	±5.0%
LINEREGULATION	±1.0%
LOADREGULATION	±2.0%
SETUP.RISEHOLD.TIME	500ms, 80ms/230VAC 1000ms / 115VAC at full load
HOLD UP TIME(TYP)	50ms /230VAC 16ms/115VAC at full load
INPUT	VOLTAGERANGE	90~264VAC
	FREQUENCYRANGE	47~63HZ
	EFFICIENCY	75%
	AC CURRENT	0.75A/115VAC 0.48A/230VAC
	INRUSH CURRENT	Cold start 60A/230vac
	LEAKAGECURRENT	0.25mA/240VAC
PROTECTION	OVER CURRENT	95~110%
	OVER CURRENT	Protection typeConstant current limiting,recovers automatically after fault condition is removed
	OVER VOLTAGE	5.75~6.75V
	OVER VOLTAGE	Protection typeShut down o/p voltage,re-power on to recover.
FUNCTION	DIMMING CONTROL (OPTIONAL)	1~10VDC or PWM
ENVIRONMENT	WORKINGTIMP	-20~+60(refer to output load derating curve)
	WORKINGHUMIDITY	-20~90%Rhnon-condensing
	STORAGE TEMP HUMIDITY	-40~+80 10~95%RH
	TEMPCOEFFICIENT	±0.03%(0~50)
	VIBRATION	10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes
SAFETY&EMC	SAFETYSTANDARDS	Design refer to UL1310 Class 2,TUV EN60950-1,EN61347-2-13,CAN/CSA C22.2 NO.223-M91M,IP67 approved
	WITHSTAND VOLTAGE	1/P-0/P:3KVAC
	ISOLATIONRESISTANCE	1/P-0/P:>100M Ohms/500VDC/25/70%RH
	EMI CONDUCTICN& RADIATION	Compliance to EN55022(CISPR22)classB
	HARMONICCURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN50204,EN61000-6-1 Light industry level criteriaA
QTHERS	MTBF	628.3Khrs min MIL-HDBK-217F(25)
	DIMENSION	1454730mm(LWH)
	PACKING	0.26Kg 60pcs / 16.6Kg / 1.25CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4.Derating may be needed under low input voltage.please check the derating curve for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meet EMC directives. 6.Length of set up time is measured at first.tuming ON/OFF the power supply may lead to increase of the set up time . 7.Constant current operation region is within the specified output voltage above. This is suitable operation region for LED related applications

features:

1. The high reliability, especially as the LED street lamp driver power supply, in a high altitude, maintenance is not convenient, the cost of maintenance is also big.

2. High efficiency, LED is energy saving products, driving power supply efficiency is higher. For the structure of the power supply installed in the lamps and lanterns, is particularly important. Because the LED luminous efficiency with the rising of LED temperature drops, so the LED heat dissipation is very important. Power supply with high efficiency, its power consumption is small, in the lamps and lanterns of calorific value is small, also lower the temperature of lamps and lanterns. Good for delaying the LED light failure.

3. High power factor, power factor is the requirement of load of power grid. Generally below 70 watts of electrical appliances, there is no mandatory indicators. Although not a single use electrical power lower power factor, the impact on the grid is not big, but at night you light a lamp and its load is too concentrated, can produce serious pollution to grid. For 30 ~ 40 watts of the LED drive power supply, it is said that in the near future, may be to power factor aspect has certain index requirements.

Addition:
the minimum quanity:10piece/pieces
delivery date:7-10days after got payment
volime of production: 10,000 Set/Sets per Month
packing: neutral packageor according customer's request
terms of payment: L/C, Western Union,